Impact Member

Impact Member

Removing






- Remove the molded foam part. Refer to => [ Impact Absorber ] Impact Absorber.

- Cut the cable tie - arrow - and free up the windshield washer fluid hose - 1 - for the spray nozzle and the wiring harness - 3 - on the impact member - 2 -.

- Remove the lock washers - 2 - and - 4 -.






- Remove the bolts - arrows -.

- Remove the connecting brace - 3 - and the impact member - 1 -.

Installing

• Tightening specifications, refer to => [ Impact Member Assembly Overview ] Impact Member Assembly Overview.

Install in reverse order of removal. Note the following:

- Install the molded foam part. Refer to => [ Impact Absorber ] Impact Absorber.