Plenum Chamber Bulkhead Assembly Overview

Plenum Chamber Bulkhead Assembly Overview






1 Expanding clip

• Remove the expanding clip.

2 Seal

• Install the seal from underneath.

3 Plenum chamber - bulkhead

• It may be necessary to open a coupling depending on the engine installed

• Before removing

- Removed plenum chamber cover.

- Remove the tower brace.

• First remove the expanding clip and then remove the bolts.

• Installing

- First secure the plenum chamber bulkhead with the expanding clips, then install the tower brace and tighten the bolts to the tightening specification.

4 Bolt

• 10 Nm

5 Plenum chamber