Front Bracket for Sill Panel Trim

Front Bracket for Sill Panel Trim

Removing

- Remove the sill panel trim. Refer to => [ Sidemember Trim Panel ] Sidemember Trim Panel.






- Remove the nut - 1 - and the bolt - 3 - from the bracket - 2 -.

- Tighten the nut to 8 Nm.

Installing

• Tightening specifications, refer to => [ Sidemember Trim Panel Assembly Overview ] Sidemember Trim Panel Assembly Overview.

Install in reverse order of removal. Note the following:

• It is necessary to insert a clip - 2 - into the bracket for securing the trim strip before installing the sill panel trim - 3 - if the vehicle has a new front bracket - 1 -.






- Install the sill panel trim. Refer to => [ Sidemember Trim Panel ] Sidemember Trim Panel.