Driver Side Instrument Panel Vent

Driver Side Instrument Panel Vent

Special tools, testers and auxiliary items required

• Wedges (T10383)

Removing






- Unclip trim panel - 1 - using the wedge (T10383/1) - arrows -.

- Remove the side cover from the instrument panel on the driver side. Refer to => [ Instrument Panel Side Cover ] Instrument Panel Side Cover.

- Remove instrument cluster trim. Refer to => [ Instrument Cluster Trim ] Instrument Cluster Trim

- Remove the screw - 1 -.






- Unclip instrument panel vent - 2 - using the wedge (T10383/1) - arrows -.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Instrument Panel Assembly Overview ] Instrument Panel Assembly Overview.