Upper Front Defroster Vent

Upper Front Defroster Vent

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

Removing






- Remove the sunlight photo sensor (G107).

- Remove the screw - 2 -.

- Carefully unclip upper front defroster vent - 1 - with the pry lever - RMV outside mirror (80 - 200) at the top from the instrument panel- arrows -.

- Guide harness connector for sunlight photo sensor (G107) through the opening and remove defroster vent.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components. Refer to => [ Instrument Panel Assembly Overview ] Instrument Panel Assembly Overview.