Rear Final Drive 0BF and 0BE (0B4A,0B2A,0B6A,0B5A,0BKA,0BLA,0BFH,0BEH Transmission)

Fastener Tightening Specifications






Driveshaft to Rear Final Drive - Tightening Specification and Sequence

• Always replace the driveshaft bolts - 1 -.






• Counterhold using the counterhold tool Touareg V10 (T10172) and adapters (T10172/5).

- Tighten the bolts - 1 - in 3 steps as follows:






Driveshaft Heat Shield - Tightening Specification

- Tighten the bolts - arrows - to 24 Nm.






Driveshaft to Rear Final Drive 0BE and 0BF - Tightening Specification and Sequence

• Always replace the driveshaft bolts - 1 -.






• Counter hold using the counterhold tool Touareg V10 (T10172) and adapters (T10172/5) (M8 bolts) or (T10172/6) (M10 bolts).

- Tighten the bolts - 1 - in 3 steps as follows: