Rear Door Window

Rear Door Window






1 Door window

• Door trim removed..

• The door cover. Refer to => [ Inner Door Panel Cover ] Inner Door Panel Cover and speaker are removed.

- To remove, release catches - arrow - from coupling plate - 2 - with a screwdriver and pull window - 1 - in window guide up slightly.

- Tip the window to the rear and remove it upward from door.

• Installation occurs in reverse order.

- Install the door window in the window guide until it audibly engage in the window regulator.

2 Window Regulator

• The window regulator remains installed inside the door.

Door window, releasing






- Lower the door window.

- Using a screwdriver, press coupling plate - 3 - outward to release through cut-out in window guide - 1 - and hole in door window - 2 -.

- Remove window upward from coupling plate.

Door window, inserting






- Insert door window - 1 - diagonally toward back in door window guide.

- Align window in front and rear window guides and slide it down.

- Press window down into window regulator coupling plate.

- This engages coupling plate in window.