Windshield Wiper System Overview

Windshield Wiper System Overview

Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Service Precautions.






1 Screw

• Tightening sequence.

2 Windshield Wiper Motor (V)

• With Wiper Motor Control Module (J400).

• Removing and installing, refer to => [ Windshield Wiper Motor (V) with Wiper Motor Control Module (J400) ] Service and Repair.

3 Screw

• Tightening sequence.

4 Nut

• 21 Nm

5 Cap

6 Windshield Wiper Arm, Passenger's Side

• Different lengths. Refer to Electronic Parts Catalog (ETKA).

• Removing and installing, refer to => [ Windshield Wiper Arms ] Removal and Replacement.

• Adjusting, refer to=> [ Windshield Wiper Arms, Adjusting ] Adjustments.

7 Windshield Wiper Blade, Passenger's Side

• Different lengths. Refer to Electronic Parts Catalog (ETKA).

• Replacing, refer to=> [ Windshield Wiper Blades, Replacing ] Service and Repair.

8 Windshield Wiper Blade, Driver's Side

• Different lengths. Refer to Electronic Parts Catalog (ETKA).

• Replacing, refer to=> [ Windshield Wiper Blades, Replacing ] Service and Repair.

9 Windshield Wiper Arm, Driver's Side

• Different lengths. Refer to Electronic Parts Catalog (ETKA).

• Removing and installing, refer to => [ Windshield Wiper Arms ] Removal and Replacement.

• Adjusting, refer to=> [ Windshield Wiper Arms, Adjusting ] Adjustments.

10 Cap

11 Nut

• 21 Nm

12 Screw

• Tightening sequence.

Windshield Wiper Motor, Tightening Specifications and Sequence






- Tighten the bolts in - 1, 2, 3 - sequence in 2 stages as follows:

- Install by hand as far as the stop.

- Tighten to 8 Nm.