Rear Parking Aid Sensor, With Trailer Hitch

Rear Parking Aid Sensor, with Trailer Hitch

Removing






Outer Sensors

- Reach behind the opening in the bumper cover and expand both tabs - arrows - while pushing the sensor - 2 - from the outside toward the inside at the same time.

- Disconnect the electrical connector - 1 - on the sensor.

Inner Sensor






- Remove the rear bumper cover.

- Press both catches - arrows - to side and press sensor - 2 - inward from outside.

- Disconnect the electrical connector - 1 - on the sensor.

Installing

Install in reverse order of removal, observing the following:

- Install the rear bumper cover.