Front Bumper Cover, Adjusting

Front Bumper Cover, Adjusting






• Gap dimensions, refer to => [ Front Bumper Cover Gap Dimensions ] Front Bumper Cover Gap Dimensions.

• Tightening specifications, refer to => [ Front Bumper Cover Assembly Overview ] Front Bumper Cover Assembly Overview.

Height adjustment:

- Loosen the bolts - arrows -.

- Adjust the height of the spacer - 1 -.

- Install the bumper cover and check the gap dimension again. Repeat the adjustment if necessary.

- Tighten the bolts.

• Ignore - 2 -.

Adjusting side to side and front to back:






- Remove the lock carrier cover. Refer to => [ Lock Carrier Cover ] Lock Carrier Cover.

- Loosen the bolts - 1 - and - 2 -.

- Adjust the front bumper cover - 3 - side to side and back and forth to match the markings - arrow -.

- Tighten the bolts.

- Check the gap dimension again and repeat the adjustment if necessary.