Rear Bumper Cover

Rear Bumper Cover

Removing






- Remove the luggage compartment side trim panel..

- Remove the nuts - arrows -.

- Remove the bolts - arrows - on the side the bumper cover - 1 - and on the bottom - 2 -.






- Disengage the left and right side pieces from the bumper cover - 1 - - arrow -.






- Disconnect the connectors - 3 - and - 4 - and remove the bumper cover - 2 -.

Installation

• Gap dimensions: => [ Rear Bumper Cover Gap Dimensions ] Rear Bumper Cover Gap Dimensions.

• Tightening specifications: => [ Rear Bumper Cover Assembly Overview ] Rear Bumper Cover Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the luggage compartment side trim panel.

- Calibrate the lane change assistance control module (J769) / (J770) if the vehicle has lane change assist.