Hood, Adjusting

Hood, Adjusting

Special tools, testers and auxiliary items required

• Adjustment gauge (3371)






Gap dimensions





Check the gap dimensions using the adjustment gauge (3371).

• - A - = 3.5 mm +/- 0.5 mm

• - B - = 3.7 mm +/- 0.5 mm

• - C - = 5.0 mm +/- 0.5 mm

Height adjustment

- Remove rear shelf..






- Loosen the nut - 1 - and slide it up or down to adjust the height of the rear lid at the front.

- After adjusting, tighten the nut on the hinge to 20 Nm.

- The rear height can be adjusted by sliding the striker pin - 1 -.






- Loosen the nut - 2 -, slide it accordingly and tighten the nuts to the specification.