Instrument Panel Cover Trim

Instrument Panel Cover Trim

Special tools, testers and auxiliary items required

• Special hook (3370)

• Wedges (T10383)

Removing






- Remove the glove compartment: Markets without knee airbag.

- Remove the bolts - arrows - on the back of the of the instrument panel cover trim.

- Remove the analog clock (Y).

- Insert the special hook (3370) into the opening for the analog clock - 1 - in the instrument panel cover and unclip both attaching points on the sides - arrows -.






- Insert wedge (T10383) at the bottom of the instrument panel cover and unclip all mounting points in succession.






• The trim can only be unclipped from the instrument panel by exerting a relatively high amount of force.

- Disconnect the electrical harness connectors and remove the instrument panel cover trim.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Instrument Panel Assembly Overview ] Instrument Panel Assembly Overview.