Mirror Glass

Mirror Glass

Special tools, testers and auxiliary items required

• Suction lifter (V.A.G 1344)






• Protective gloves

Removing

Injury risk.

• Wear protective gloves.

- Position the suction cup (V.A.G 1344) on the center of the mirror glass - 1 -, as illustrated.






- Remove the mirror glass from the mirror adjuster using the suction lifter (V.A.G 1344).

- Disconnect the heated mirror electrical connectors - 1 - and - 2 - on the rear side of the mirror glass - 3 -.






- Unclip the connector - 4 - from the bracket - arrow -.

- Disconnect electrical connectors.

Installation

Installation is reverse of removal, but note the following:

- Position the mirror glass on the mirror adjusting unit and press it on.

• Only press the center of the mirror glass when pressing it on.