Sill Side Trim Side Piece/Bracket

Sill Side Trim Side Piece/Bracket

• The procedure for removing and installing is described for the driver seat sill side trim bracket. The procedure is similar for the side piece on the tunnel side.

Removing






- Remove seat cover in the area of the bracket. Refer to and press to the side.

- Remove the expanding rivets - 1 and 2 -.

- Remove the screws - 3 and 4 - and the bracket - 5 -.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Side Pieces and Trim Bracket Assembly Overview ] Side Pieces and Trim Bracket Assembly Overview.