Brakes, Testing, with AWD

Brakes, Testing, with AWD

Testing on a One-Axle Roller Test Stand for AWD Vehicles

During this test, the wheels of one axle are driven in opposite directions, to prevent delivering power to the other axle.

The test speed must not exceed 6 Km/h, otherwise, the brakes may lock up due to the roller start-up delay (EDL regulation).

If the test speed exceeds 6 km/h the Torsen differential will be destroyed.

Test stands approved by Audi meet these requirements.

Testing on a One-Axle Roller Test Stand

The test speed must not exceed 6 Km/h, otherwise, the brakes may lock up due to the roller start-up delay (EDL regulation).

Test stands approved by Audi meet these requirements.