Diagram 42/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Battery monitoring control module, Battery interrupt igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

C24 - Suppressor

J234 - Airbag control module Locations Locations

J367 - Battery monitoring control module

J492 - All wheel drive control module All-Wheel Drive System Overview

J505 - Windshield defogger control module

N253 - Battery interrupt igniter, near the battery Fuses (SD) (on Fuse Panel D) Locations

SD1 - Fuse 1 (on fuse panel D) Overview of Fuses Fuses (SD) (on Fuse Panel D)

SD2 - Fuse 2 (on fuse panel D) Overview of Fuses Fuses (SD) (on Fuse Panel D)

SD3 - Fuse 3 (on fuse panel D) Overview of Fuses Fuses (SD) (on Fuse Panel D)

S125 - Glow plug fuse Fuses (SA) On Fuse Panel A

S189 - Glow plug fuse 2 Fuses (SA) On Fuse Panel A

T2b - Double connector

T2s - Double connector

TV22 - Terminal 30 wire junction 2

T100 - 100-pin connector Locations

U6 - Battery jump start terminal

(519) - Terminal 30 threaded connection (on flat conductor)

(624) - Ground connection near starter battery

(B481) - Connection 17 (in main wiring harness)

(D50) - Positive connection (30) (in engine compartment wiring harness)

(P2) - Positive connection (30) (in battery wiring harness)

* - Refer to applicable standard equipment wiring diagram

*2 - Flat conductor

Next Diagram 42/3 (Tracks 15-28)