Diagram 1/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Intake air temperature sensor, Manifold absolute pressure sensor, Camshaft position sensor 2, Fuel pressure sensor, Brake booster pressure sensor, Camshaft position sensor 3, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G42 - Intake air temperature sensor Locations

G71 - Manifold absolute pressure sensor Locations

G163 - Camshaft position sensor 2 Locations

G247 - Fuel pressure sensor Locations

G294 - Brake booster pressure sensor

G300 - Camshaft position sensor 3 Locations

J623 - Engine control module Control Modules in Front Part Of Vehicle

T3al - 3-pin connector

T3m - 3-pin connector

T3p - 3-pin connector

T4cd - 4-pin connector

T4y - 4-pin connector

T14b - 14-pin connector, in the engine compartment, left

T14c - 14-pin connector, in the engine compartment, left

T91 - 91-pin connector Engine Control Module (ECM) -J623-

T105 - 105-pin connector Engine Control Module (ECM) -J623-

(316) - Sensor ground connection 2 (in engine wiring harness)

(D141) - Connection (5V) (in engine wiring harness)

(D174) - Connection 2 (5V) (in engine wiring harness)

Previous Diagram 1/15 (Tracks 183-196)

Next Diagram 1/17 (Tracks 211-224)