Crankshaft, Cylinder Block - Fastener Tightening Specifications

Fastener Tightening Specifications






Vibration Damper, Tightening Specification and Sequence






• Replace bolts which have been tightened to an additional torque.

• Install the bolts with locking compound; Locking compound, refer to the electronic parts catalog ETKA.

• Clean the threaded holes with a thread tap.

- Tighten bolts in 3 stages as follows:






Baffle Plate - Tightening Specifications and Sequence






• Replace bolts which have been tightened to an additional torque.

- Tighten the bolts in 2 steps according to the tightening sequence:






Guide Frame Tightening Specifications and Sequence






• Replace bolts which have been tightened to an additional torque.

- Tighten the bolts in 6 steps according to the tightening sequence:






- Tighten the guide frame to cylinder block sealing surface bolts, - highlighted in dark -, in a diagonal sequence to 9 Nm.