Timing Component Alignment Marks: Locations

Timing Component Alignment Marks


• The markings - 1 - on the vibration damper and - 2 - on the cylinder block must line up.






• The threaded holes - arrows - in the camshafts must face upward.






- (T40070) mounted on both cylinder heads and tightened to 25 Nm - arrows -.






• The (T40070) is correctly positioned when the holes for the cylinder head bolts remain free.

- Install the (T40227) through the hole inside the vibration damper and all the way into the cylinder block. If necessary, move the crankshaft back and forth slightly to center the bolt.