Diagram 1/25 (Tracks 323-336)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake lamp switch, Engine control module, Fuel tank leak detection control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations

G400 - Fuel tank pressure sensor Locations

J623 - Engine control module Control Modules in Front Part Of Vehicle

J909 - Fuel tank leak detection control module Overview Of Control Modules Locations

ST3 - Fuse panel 3

SF4 - Fuse 4 (on fuse panel F) Overview Of Fuses

T3t - 3-pin connector

T4c - 4-pin connector

T5p - 5-pin connector

T17f - 17-pin connector, in the engine compartment E-box Overview of Connector Stations

T17g - 17-pin connector, in the engine compartment E-box Overview of Connector Stations

T17k - 17-pin connector, in the connector station, right A-pillar Overview of Connector Stations

T91 - 91-pin connector Engine Control Module (ECM) -J623-

(135) - Ground connection 2 (in instrument panel wiring harness)

(199) - Ground connection 3 (in instrument panel wiring harness)

(602) - Ground connection in left front footwell

(B335) - Connection 1 (54) (in main wiring harness)

* - USA only

*2 - Refer to applicable wiring diagram for fuse positions

Previous Diagram 1/24 (Tracks 309-322)

Next Diagram 1/26 (Tracks 337-350)