Diagram 18/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Selector lever position sensor, Transmission control module, Selector lever sensor system control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G727 - Selector lever position sensor Locations

JX1 - Electric drive power and control electronics

J217 - Transmission control module Locations

J519 - Vehicle electrical system control module Control Modules in Front Part Of Vehicle

J587 - Selector lever sensor system control module Locations

ST1 - Fuse panel 1

ST3 - Fuse panel 3

SF12 - Fuse 12 (on fuse panel F) Overview Of Fuses

T10f - 10-pin connector

T16a - 16-pin connector

T17g - 17-pin connector, in the engine compartment E-box Overview of Connector Stations

T32b - 32-pin connector Vehicle Electrical System Control Module -J519-

(379) - Ground connection 14 (in main wiring harness)

(687) - Ground connection 1 on center tunnel

(B389) - Powertrain CAN bus high connection 7 (in main wiring harness)

(B396) - Powertrain CAN bus low connection 7 (in main wiring harness)

(B486) - Connection 22 (in main wiring harness)

(B733) - Connection 3 (58s) (in main wiring harness)

* - only for vehicles with hybrid drive

*2 - Refer to applicable wiring diagram for fuse positions

*3 - Depending on equipment

*4 - Refer to applicable high voltage system wiring diagram

Previous Diagram 18/5 (Tracks 43-56)

Next Diagram 18/7 (Tracks 71-84)