Towing Recognition Control Module (J345)

Towing Recognition Control Module (J345)

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions" using the Vehicle Diagnostic Tester.

Removing






- Remove the luggage compartment rear trim panel..

- Release the clips - arrows A - and remove the towing recognition control module - 1 - from the frame - arrow B -.

- Disconnect the connectors - 3, 4 and 5 -.

Installing

Install in reverse order of removal, observing the following:

- Install the luggage compartment rear trim panel..