Power Steering, Checking Fluid Level

Power Steering, Checking Fluid Level

- Do not run engine and turn front wheels to straight ahead position.

Fluid Cold (approximately 20 °C (68 °F)):

- Remove the cap.

- Wipe dipstick off with a clean cloth.

- Screw cap on hand-tight and unscrew again.

• The cap must be fully screwed in order to obtain an accurate fluid level reading.

- Check fluid level: Oil level must be within area - B -.






Fluid at Operating State Temperature (approximately 80 °C (176 °F)):

- Remove the cap.

- Wipe dipstick off with a clean cloth.

- Screw cap on hand-tight and unscrew again.

• The cap must be fully screwed in order to obtain an accurate fluid level reading.

- Check fluid level: Oil level must be within the - A - area.






• Fluid must be drawn off if the level is above the specified range.

• If oil level is below aforementioned area, then the hydraulic system must be checked for leaks. It is not enough to just add fluid.

• Do not use drained hydraulic oil.