Rear Suspension

Contact Corrosion

Contact corrosion can occur when incorrect fasteners (bolts, nuts, washers, etc.) are used.

For this reason, only fastening elements with a special surface coating (Dacromet) are installed. Allocation, refer to the Parts Catalog.

In addition, rubber and plastic parts and adhesive are made of non-conductive materials.

If there are doubts as to whether parts should be reinstalled, install new parts.

• Only use genuine Audi replacement parts. They have been checked and are compatible with aluminum.

• Accessories must be approved by Audi AG!

• Damage due to contract corrosion is not covered under warranty!