Front Emergency Release Cable and Parking Lock

Front Emergency Release Cable and Parking Lock

Removing

The vehicle could start to roll and cause an accident.

• Press the button on the parking brake to activate it.

- Remove the rear noise insulation - 2 -..






- Release the retainers - arrows A - and slide the sleeve - 1 - in direction of - arrow B -.






- Disconnect the rear emergency release cable from the front emergency release cable - arrow C -.

- Remove the bolts - 2 and 3 - and remove the front emergency release lever on the selector lever - 1 - for the parking lock emergency release.






Installing

Install in reverse order, paying attention to the following:

• For the correct tightening specifications, refer to => [ Parking Lock Emergency Release Overview ] Parking Lock Emergency Release Overview.

- Be sure to maintain the distance - a - between the emergency release cable - 1 - and the lever - 2 -.






• - a - = minimum 2 mm

- Attach the rear emergency release cable - 2 - to the front emergency release cable - 1 - from the top - arrow A -






- Install the sleeve - 3 - until it engages - arrow B -.

Make sure the sleeve fits securely.

- Check the parking lock emergency release. Refer to => [ Parking Lock Emergency Release, Operating and Checking ] Parking Lock Emergency Release, Operating and Checking.