Impact Member

Impact Member

Removing





• Attach all cable ties at the same locations when installing.

- Remove front bumper cover.

- Disconnect the electrical connector - 4 - on the horns and free up the electrical wiring harness - 3 - on the horn bracket.

- Free up the washer nozzle water drain hose by disconnecting the cable tie - 1 -.

- Remove the bolts - arrows - and the bumper cover spacer - 2 -.

- Remove the impact bar - 5 - from the mounts.

Installation

• Tightening specifications, refer to=> [ Impact Bar Assembly Overview ] Impact Bar Assembly Overview.

- Install the front bumper cover.