Impact Member Bracket

Impact Member Bracket






1 Bolt

• 55 Nm

2 Side Impact Bar

• Removal and Installation, refer to => [ Impact Member ] Impact Member.

3 Impact Member Bracket

• Removing

- Mark the installation position of the lock carrier bracket.

- Remove front bumper cover.

- Remove the impact member - 2 -.

- Remove the bolts - 1 -.

- Remove the locating bolt - 4 -.

- Remove the impact member bracket on the lock carrier.

• Installing

• Tightening specifications, refer to => [ Impact Bar Assembly Overview ] Impact Bar Assembly Overview.

- Install the impact member bracket according to the marking made during removal.

- Install the impact member. Refer to => [ Impact Member ] Impact Member.

- Install the front bumper cover.

4 Locating Bolt

• 5 Nm