Backrest Actuator Bracket

Backrest Actuator Bracket

• Removal and installation are same for right and left.

Removing






- Remove the backrest release actuator. Refer to => [ Backrest Release Actuator ] Backrest Release Actuator.

- Open the cover in the luggage compartment side trim panel.

- Remove the nuts - 1 - and then remove the bracket - 2 -.

Installation

Installation is reverse of removal, but note the following:

- Mount the bracket so that the tab fits into the opening - arrow - in the body.

Tightening specifications,refer to => [ Backrest Release Overview ] Backrest Release Overview.