Front Turn Signal Lamp Bulbs

Front Turn Signal Lamp Bulbs

Removing






- Remove headlamp housings. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Open the clip - 2 - in the direction of the - arrow -.

- Move the housing cover - 1 - to the side and remove it.

- Vehicles with cornering lamp (AFS): disconnect the connectors - 1, 2 and 3 - on the headlamp power output stages - 4 -.






- Turn the bulb - 1 - counterclockwise in the direction of the - arrow - and remove it from the housing.






- Unlock the retaining spring and disconnect the bulb connector.

Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb into the headlamp without touching the bulb with bare hands.

- Close housing cover and secure with clip.

- Vehicles with cornering lamp (AFS): install the headlamp power output stage. Refer to => [ Headlamp Power Output Stages (J667)/(J668) ] Headlamp Power Output Stages (J667)/(J668).

- Install the headlamp housing. Refer to => [ Headlamp Housing ] Headlamp Housing.