Ribbed Belt

Ribbed Belt

Special tools, testers and auxiliary items required

• Locking Tool (T40098)

Removing


Risk of destroying due to reversed running direction on a used ribbed belt.

• Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.

- To release ribbed belt tension, rotate tensioner in direction of - arrow -.






- Secure the tensioner with the (T40098).

- Remove ribbed belt.

Installing

Installation is performed in the reverse order of removal, noting the following:

• Secure the generator and A/C compressor before installing the ribbed belt.

- Install the ribbed belt as illustrated.






- Turn the tensioner in direction of a- arrow - and remove the (T40098).






- Release tensioner.

- Check whether ribbed belt is routed correctly.

- Start engine and check whether ribbed belt runs correctly.