Radiator Cooling Fan Control Module: Service and Repair

Coolant Fan Control Module

• The following description is based on a coolant fan with a separate coolant fan control module.

Removing

- Remove the front noise insulation - 1 -.






- Remove the coolant fan electrical connector - 1 - from the bracket and disconnect it by sliding the retainer back - arrow - and pressing the release down.






- Free up the electrical wiring harness to the coolant fan control module.

- Disconnect electrical connectors - 2 - and - 3 -.






- Remove the bolt - arrow - and the coolant fan control module - 1 -.

Installing

• Tightening specifications, refer to => [ Radiator and Coolant Fan Overview ] Radiator and Coolant Fan Overview.

Installation is performed in reverse order of removal, noting the following:

- Install the noise insulation.