Front Body Acceleration Sensors

Front Body Acceleration Sensors

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1410)

Removing

- Raise the vehicle.

- Release and disconnect the connector - 2 -.






- Remove the nuts - 1 - and remove the sensors - 4 - from the bracket - 3 -.

Installing

Install in reverse order of removal. Note the following:

When installing, always pay attention to the installation position of the sensor.

- Install the sensor - 4 - as illustrated.






- Tighten the nuts - 1 - to 8 Nm.

Tightening specification for the nuts - 5 -: 5 Nm.