Lane Change Assistance, Preparing For Calibration

Lane Change Assistance, Preparing for Calibration

Special tools, testers and auxiliary items required

• Calibration tool for lane changing assist (VAS 6350)






1 Spacing Laser (VAS 6350/2)

• For distance measurement

2 Calibration Tool (VAS 6350)

3 Water Level

• On calibration tool (VAS 6350)

• To check horizontal position of calibration tool (VAS 6350)

4 Catch Bracket

• For mounting spacing laser (VAS 6350/2) for distance measurement

• Distance from the wheel center sensors (VAS 6350/1) at the rear wheels: dimension - a - = 1700 ± 2 mm

5 Wheel Center Sensor (VAS 6350/1)

• With wheel bolt adapter SW 16 and measuring paddle

6 Brand Emblem

• The laser point is aligned on the center of the brand emblem

7 Calibration Tool for Lane Change Assistance (VAS 6350/4)

• Is moved from right to left side of measuring field during calibration

• When installed correctly, vehicle electrical system voltage line must be connected at bottom left of calibration device (as seen in direction of travel)

8 Measurement Scale

• For positioning calibration tool for lane change assistance (VAS 6350/4)

9 Line Laser (VAS 6350/3)

• With laser eye protection

• On calibration tool (VAS 6350)

• Switching on and off

10 Plastic Foot

• Quantity: 3

• Adjustable in order to adjust horizontal position of calibration tool (VAS 6350)