Bench Cover and Cushion Overview

Bench Cover and Cushion Overview

• The overview is based on the two thirds left rear seat and one third right rear seat.






1 Cushion

• Cover with upholstery, removing and installing. Refer to => [ Bench Seat ] Bench Seat.

• Cover, separating from cushion and connecting. Refer to => [ Cover, Separating from Upholstery ] Cover, Separating From Upholstery.

2 Wire

• In foam in upholstery.

• For securing cover to upholstery.

3 Cushion Clamp

• For securing cover to upholstery.

• Always replace if removed.

• Install in same location as before removal.

4 Contour Strip

• Sewn into cover.

• For securing cover to upholstery.

5 Cover

• Cover with upholstery, removing and installing. Refer to => [ Bench Seat ] Bench Seat.

• Cover, separating from cushion and connecting. Refer to => [ Cover, Separating from Upholstery ] Cover, Separating From Upholstery.

6 Molding

• Sewn into cover.

• For securing cover to upholstery.

7 Cushion Clamp

• For securing cover to outer cushion.

• Always replace if removed.

• Install in same location as before removal.


Ends of wire clips must face in direction of upholstery after installing and must be bent correctly. Otherwise, there is a risk of injury.

8 Wire

• In foam in upholstery.

• For securing cover to upholstery.