Pass-Through Cover

Pass-Through Cover

Removing






- Remove the left two third rear seat. Refer to => [ Seat Frame ] Seat Frame.

- Remove the inner cover on the rear seat backrest. Refer to => [ Backrest Cover, Inner ] Backrest Cover, Inner.

- Move the rear seat backrest cushion to the side and remove the circlip - 1 - with a screwdriver.

- Unlock the pass-through door.

- Remove the trim mat - 3 - on the pass-through door by removing the piping with a screwdriver - 5 - - arrow -.

- Remove the bolt - 4 -.

- Remove the pass-through door - 2 - and the center armrest.

Installation

To install, perform the steps used in removal in reverse order.

Tightening specifications, refer to => [ Pass-Through Door Overview ] Pass-Through Door Overview.