Diagram 1/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Rain/light recognition sensor, Wiper motor control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G397 - Rain/light recognition sensor Locations

J400 - Wiper motor control module Control Modules in Front Part Of Vehicle

J519 - Vehicle electrical system control module Overview of Control Modules in interior of vehicle

ST1 - Fuse panel 1

ST2 - Fuse panel 2

SC8 - Fuse 8 (on fuse panel C) Overview Of Fuses

SC9 - Fuse 9 (on fuse panel C) Overview Of Fuses

SC12 - Fuse 12 (on fuse panel C) Overview Of Fuses

T3c - 3-pin connector

T4g - 4-pin connector Locations

T16b - 16-pin connector Vehicle Electrical System Control Module -J519-

T17m - 17-pin connector Vehicle Electrical System Control Module -J519-

T17n - 17-pin connector Vehicle Electrical System Control Module -J519-

T32b - 32-pin connector Vehicle Electrical System Control Module -J519-

T46i - 46-pin connector Overview Of Connector Stations

(370) - Ground connection 5 (in main wiring harness)

(639) - Ground connection on left A-pillar Locations

(B475) - Connection 11 (in main wiring harness)

* - Only for right-hand drive vehicles

*2 - Refer to applicable wiring diagram for fuse positions

*3 - Left-hand drive vehicles

*4 - Driver connection bridge, brown

*5 - Data bus wire (CAN bus)

Previous Diagram 1/9 (Tracks 99-112)

Next Diagram 1/11 (Tracks 127-140)