Diagram 42/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Transmission control module, Data bus on board diagnostic interface, Sub-transmission 2 valve 3, Sub-transmission 2 valve 4, Cooling oil valve, Main pressure valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J217 - Transmission control module Locations Locations Control Modules in Front Part Of Vehicle

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

J623 - Engine control module Control Modules in Front Part Of Vehicle

J743 - DSG transmission Mechatronic Control Modules in Front Part Of Vehicle

N439 - Sub-transmission 2 valve 3 Locations

N440 - Sub-transmission 2 valve 4 Locations

N471 - Cooling oil valve Locations

N472 - Main pressure valve Locations

T14h - 14-pin connector Locations

T16r - 16-pin connector Locations

T17b - 17-pin connector, blue Overview Of Connector Stations

T17r - 17-pin connector, white Overview Of Connector Stations

T20d - 20-pin connector Locations

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B385) - Powertrain CAN bus high connection 3 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B392) - Powertrain CAN bus low connection 3 (in main wiring harness)

(D159) - High bus connection (in engine compartment wiring harness)

(D160) - Low bus positive connection (in engine compartment wiring harness)

* - Refer to applicable engine wiring diagram

Previous Diagram 42/2 (Tracks 1-14)

Next Diagram 42/4 (Tracks 29-42)