Rear Vent Air Guide Slots, Sealing

Rear Vent Air Guide Slots, Sealing

• This air guide is attached to the air outlet openings in the air conditioner. There are slits inside the air guide. If the flap position is incorrect, especially on vehicles with the "Comfort" A/C system, whistling noise can come from these slits. The upper slits are covered with tape during production (running change from February 2009).

- Cover the upper center console to prevent damage.

- Remove the radio / multimedia control head (E380).

- Remove the Climatronic control module (J255) A/C control head. Refer to => [ Climatronic Control Module (J255) A/C Control Head ] Climatronic Control Module (J255) A/C Control Head.

- Remove the front information display control head control module (J523) if equipped.

- Reach into the opening in the center console and cover both slits at the top - A - of the air guide - C - with adhesive tape - B - (approximately 2 cm x 4 cm, made of air-tight material).






• The slots - A - are covered by the brace - D -.

• Cut two adhesive strips from the insulation (replacement part number 8E0 260 329) - B - Refer to the Parts Catalog.