Driver Side Instrument Panel Cover Overview

Driver Side Instrument Panel Cover Overview






1 Bolt

• 3 Nm

2 Side Cover

• For instrument panel.

• Removing and installing, refer to => [ Instrument Panel Side Cover ] Instrument Panel Side Cover.

3 Clips

• Insert in the footrest.

4 Connector, 16-pin (T16)

• Diagnostic connector

5 Headlamp Adjuster (E102)

• Special equipment

6 Clips

• Install on the A/C unit.

7 Bolt

• 3 Nm

8 Spring Clamp

• For the driver side instrument panel cover.

• Quantity: 3

• Press into the instrument panel.

9 Bolt

• 3 Nm

10 Trim

• For headlamp adjuster (E102).

• Special equipment

• Removing and installing, refer to => [ Headlamp Range Control Adjuster Trim ] Headlamp Range Control Adjuster Trim.

11 Light Switch (E1)

12 Driver Side Instrument Panel Cover

• There are different versions depending on the country.

• Removing and installing, refer to => [ Driver Side Instrument Panel Cover ] Driver Side Instrument Panel Cover.

• Equipment versions with Headlamp range control adjuster (E102) : after replacing the driver side instrument panel cover, refer to => [ Headlamp Range Control Adjuster, Making an Additional Cut-Out in Instrument Panel Cover ] Headlamp Range Control Adjuster, Making an Additional Cut-Out in Instrument Panel Cover.

13 Bolt

• 3 Nm