Inner Bulb Holder

Inner Bulb Holder

Removing







Danger of unintended engine ignition.

Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.

- Switch off ignition and remove ignition key.

- Turn light switch into the "0" position.

- Insert a screwdriver - 2 - into the opening and pry out the cap - 1 - from the inside, in the direction of the - arrow -.

- Turn the socket - 1 - counterclockwise, in the direction of the - arrow -.






- Remove socket from rear light housing.

- Remove lamp from socket.

Installing

Install in reverse order of removal, observing the following:

- Insert new bulb into socket, do not touch glass cone with bare hands when doing so.

- Secure socket by turning clockwise.