Ribbed Belt

Ribbed Belt

Removing

- Remove the front noise insulation - 1 -..







Risk of destroying due to reversed running direction on a used ribbed belt.

• Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.

- Pivot the tensioner clockwise - arrow - to release the tension on the ribbed belt.






- Remove ribbed belt and release tensioning device.

Installing

Install in reverse order, paying attention to the following:

- Route the ribbed belt over the ribbed belt pulley in the sequence specified.






1. Generator

2. Idler roller

3. Coolant pump

4. Power steering pump

5. A/C Compressor

6. Ribbed belt tensioning damper

7. Vibration damper with ribbed belt pulley


• When installing the ribbed belt, make sure it is seated correctly on the pulleys.

- Start the engine and check the belt routing.

- Install the noise insulation..