Rear Door Window Assembly Overview

Rear Door Window Assembly Overview






1 Door Window

• To remove, lower the door window into the door until the screws in the inner door panel are visible through the holes - arrow -.

• Push the bolt clamping pins.

• Push the bolts through, tilt the window inside the door and remove it.

• Remove the clamping pins and bolts from the door

2 Window Regulator

• The window regulator remains installed inside the door.

3 Door

4 Nut

• 6 Nm

5 Cover

• Installed

6 Bolts

• Two-part with clamping pin.

• The bolts can be reused.