Lid Grip

Lid Grip

Removing






1 Securing Piece

2 Nut

- Tightening specification: 8 Nm.

• With spacer sleeve.

3 Rear Lid

4 Handle

• Disconnect inner electrical harness connector at grip piece.

• Remove nuts on securing pieces - 1 - at left and right as well as nuts - 2 -.

- Remove securing pieces from lid.

• Release retainer on grip piece and pull out of lid.

- Installation is performed in the reverse order of removal.

Release Retainer For Grip Piece





- Press both catches - arrows - over license plate lights back and remove grip piece - 1 -.

- To install, press grip piece into lid cut-out.