Cornering Lamp Bulb

Cornering Lamp Bulb

• Adjust the headlamps after performing any work that could have affected their adjustment, refer to => [ Headlamps, Adjusting ] Headlamps, Adjusting.

Removing






- Remove headlamp. Refer to => [ Headlamps ] Headlamps.

- Remove the housing cover - 1 - for the static cornering lamp/turn signal from the headlamp housing.

• Ignore - 2 - and - 3 -.

- Disconnect the connector - 3 - from the spring clip.






- Disconnect the connector - 1 - from the bulb.

Installing

Install in reverse order of removal, observing the following:

- Push the bulb past the resistance of the spring clips into the housing and connect the connector.

• The tab - 2 - must point up when installing.

- Close the housing cover - 1 -. When doing this, the strap - 2 - must align with the mark - 3 - on the headlamp housing.






- Install headlamp. Refer to => [ Headlamps ] Headlamps.