Clean Working Conditions

Clean Working Conditions

• Always clean connection places and surrounding areas with engine or brake cleaner before loosening and dry cleaned places.

• Clean the transmission and transmission components using cleaning solution (D 009 401 04).

• Use lint-free cloths when cleaning, for example, the "WYPALL X70/WORKHORSE" cloth made by Kimberly-Clark Professional.

• Seal all open lines and connections immediately with clean plugs or caps from the engine bung set (VAS 6122).

• Place removed parts on a clean surface and cover. Only use lint-free cloths for this!

• Carefully cover or plug unpacked components if repairs cannot be performed immediately.

• Only install clean components: Remove the replacement parts from their packaging just prior to installing them.

• Protect the disconnected connectors from dirt and moisture and only connect them when they are dry.