Wiper Arm

Wiper Arm

Special tools, testers and auxiliary items required

• Windshield Wiper Arm Tool Set (T10369)

Removing

- Switch on ignition.

- Actuate rear window wiper and allow wiper arm to run to end position.

- Switch off ignition and remove ignition key.

- Carefully spread ends of cover cap - arrows - and lift off wiper arm.






- Carefully pull off nozzle - 2 -.






- Loosen the nut - 1 - one turn.

- Place an M6 nut - 4 - on the nut.






- Position the Puller (T10369/1) on the wiper arm - 1 - as illustrated.

- Position the thrust piece - 2 - on the wiper axle.

- Rotate the bolt - 3 - clockwise until the wiper arm is removed from the axle.

- Remove nut completely and remove wiper arm.

Installing

Install in reverse order of removal, observing the following:

- Adjust wiper arm, refer to => [ Rear Window Wiper Arm, Adjusting ] Rear Window Wiper Arm, Adjusting.