Gearshift Rails and Selector Forks

Gearshift Rails and Selector Forks

• Removing the shift fork group from the bearing brackets for the input and output shafts. Refer to => [ Shift Fork Group, Input Shaft, 1st, 2nd and Reverse Gear Output Shafts Overview ] Shift Fork Group, Input Shaft, 1st, 2nd and Reverse Gear Output Shafts Overview.






1 Gearshift Rail / Reverse Gear Shift Fork

2 Gearshift Rail / Shift Fork for 1st and 2nd Gear

3 Ball Sleeve

• Remove and install, for example, using locking ring pliers (for the outer races) from the gearshift rail / shift fork

4 Gearshift Rail / Shift Fork for 3rd and 4th Gear

5 Gearshift Rail / Shift Fork for 5th and 6th Gear

• With yoke for the gearshift rail / shift fork mounting

• The shift fork cannot be separated from the yoke.