Lock Cylinder Guide

Lock Cylinder Guide

Removing





- Remove lock cylinder. Refer to => [ Lock Cylinder ] Lock Cylinder.

- Remove the door trim..

- Remove the door shell cover. Refer to => [ Door Shell Cover ] Door Shell Cover.

- Tilt the lock cylinder guide - 1 - up as far as the stop - arrow -.

- Remove the lock cylinder guide.

Installation





Installation is reverse of removal, but note the following:

- When inserting the lock cylinder guide - 1 -, make sure the securing tab - 3 - engages in the mount - 2 - on the door shell - arrow -.

- Install the door shell cover. Refer to => [ Door Shell Cover ] Door Shell Cover.

- Install the door trim..

- Install the lock cylinder. Refer to => [ Lock Cylinder ] Lock Cylinder.