Mirror Adjusting Unit Mount Cover

Mirror Adjusting Unit Mount Cover

Removing






- Remove the exterior rearview mirror housing. Refer to => [ Exterior Rearview Mirror Housing ] Exterior Rearview Mirror Housing.

- Remove the screws - 2 - and - 3 -.

- Remove the retaining straps - arrows A -.

- Push the cover - 1 - down enough so that the tabs disengage and then release the hooks - 4 - - arrow B -.

- Remove the cover on the mirror adjustment unit bracket.

Installation

• Tightening specifications, refer to => [ Exterior Rearview Mirror Overview ] Exterior Rearview Mirror Overview.

Installation is reverse of removal, but note the following:

- Install the exterior rearview mirror housing. Refer to => [ Exterior Rearview Mirror Housing ] Exterior Rearview Mirror Housing.